ULP-4040
Product Features
Inoshanda pakurapwa kwezvitubu zvemvura zvakaita semvura yepamusoro, pasi pemvura, mvura yemupombi uye mvura yemunisiparati ine munyu wemukati pazasi 2000 ppm.
Kuwedzera kurambwa mwero uye kuyerera kwemvura kunogona kuwanikwa pasi pesimba rekushanda rakaderera, iro rinogona kudzikisa mutengo nekuvandudza mabhenefiti ehupfumi. Iyo membrane element ine kugadzikana kwakanaka uye foiling kuramba.
Inoshandiswa zvakanyanya mukurongedza mvura yekunwa mvura, boiler kugadzira-up mvura yekugadzirisa chikafu uye maindasitiri ekugadzira mishonga.
Sheet Type
ZVINOTAURWA & PARAMETERS
| Model | Kurambwa Kwakagadzikana | Min Kuramba | Permeate Flow | Inoshanda Membrane Area | Spacer Ukobvu | Replaceable products |
| (%) | (%) | GPD(m³/d) | ft2(m2) | (mil) | ||
| TU3-4040 | 99.5 | 99.3 | 2200(8.3) | 85(7.9) | 34 | XLE-440 |
| TU2-4040 | 99.3 | 99 | 2700(10.2) | 85(7.9) | 34 | BW30HRLE-440 |
| TU1-4040 | 99 | 98.5 | 3100(11.7) | 85(7.9) | 34 | ULP21-4040 |
| Testing Conditions | Operating pressure | 150psi (1.03MPa) | ||||
| Test solution tembiricha | 2 5 ℃ | |||||
| Test solution concentration (NaCl) | 1500ppm | |||||
| PH kukosha | 7-8 | |||||
| Recovery rate ye single membrane element | 15% | |||||
| Kuyerera kwemhando yeimwe membrane element | ±15% | |||||
| Operating Conditions & Limitis | Maximum kushanda kudzvinyirira | 600 psi (4.14MPa) | ||||
| Maximum tembiricha | 45 ℃ | |||||
| Maximum feedwater fow | Nhamba yepamusoro yemvura yekudya: 8040-75gpm (17m3/h) 4040-16gpm(3.6m3/h) | |||||
| SDI15 Maximum feedwater flow SDI15 | 5 | |||||
| Maximum concentration yemahara chlorine: | ＜0.1ppm | |||||
| Inobvumidzwa pH yemhando yekuchenesa makemikari | 3-10 | |||||
| Inobvumidzwa pH renji yemvura yekudyisa iri kushanda | 2-11 | |||||
| Maximum pressure drop per element | 15psi(0.1MPa) | |||||
